ABBEY WOOD: supplier water report
This is a report for the named source area. Check your postcode before assuming it describes the water serving your address.
A newer source document is awaiting validation. The figures below are from the approved reporting period shown. Official supplier information
Thames Water · Supply area: ABBEY WOOD
Published water hardness
262mg/l as CaCO₃
Hard
Hardness reporting period: 2024
5 samples · reported range 248–281 mg/l
This hardness can contribute to limescale in kettles and appliances. Use the units in your appliance manual and follow its care instructions. Hardness is not a health or safety score.
2.62 mmol/l
A conversion of the published hardness, not another test. Follow your appliance’s model-specific instructions.
Has the hardness changed?
History for this reported source area. Only comparable annual statistics appear in the chart; rolling summaries are kept separate. These are not daily tests at your address.
A comparable historical series is not available yet. We will add earlier reports when we can verify their periods and source areas.
Inside the supplier report
Period: 2024. Summary values do not establish that every sample complied. Read the supplier’s notes for investigations and actions.
Hardness and minerals 7 parameters
Useful for understanding mineral composition and appliance settings. Different minerals are separate measurements; hardness does not determine them all.
Hardness (Total) as CaCO3262 mg/l as CaCO₃
Source parameter: Hardness (Total) as CaCO3. Published mean: 262 mg/l as CaCO₃.
Samples: 5. Range: 248 to 281.
Compliance counts are not retained for this entry. Check the original report.
Fluoride as F0.14 mg/l
Source parameter: Fluoride as F. Published mean: 0.14 mg/l.
Samples: 8. Range: 0.11 to 0.19.
Compliance counts are not retained for this entry. Check the original report.
Magnesium4.2 mg/l
Source parameter: Magnesium. Published mean: 4.2 mg/l.
Samples: 4. Range: 4 to 4.3.
Compliance counts are not retained for this entry. Check the original report.
Alkalinity as CaCO3205 mg/l as CaCO₃
Source parameter: Alkalinity as CaCO3. Published mean: 205 mg/l as CaCO₃.
Samples: 5. Range: 197 to 213.
Compliance counts are not retained for this entry. Check the original report.
Sodium as Na24 mg/l
Source parameter: Sodium as Na. Published mean: 24 mg/l.
Samples: 8. Range: 20 to 29.
Compliance counts are not retained for this entry. Check the original report.
Chloride as Cl37 mg/l
Source parameter: Chloride as Cl. Published mean: 37 mg/l.
Samples: 9. Range: 31 to 43.
Compliance counts are not retained for this entry. Check the original report.
Sulphate as SO445 mg/l
Source parameter: Sulphate as SO4. Published mean: 45 mg/l.
Samples: 9. Range: 41 to 51.
Compliance counts are not retained for this entry. Check the original report.
Taste, appearance and treatment 5 parameters
These are published sample results. They cannot diagnose a change in taste, smell or appearance at your tap today.
pH (acidity / alkalinity)7.7 pH units
Source parameter: Hydrogen Ion. Published mean: 7.7 pH units.
Samples: 53. Range: 7.1 to 8.
Compliance counts are not retained for this entry. Check the original report.
Chlorine (Residual)0.44 mg/l
Source parameter: Chlorine (Residual). Published mean: 0.44 mg/l.
Samples: 195. Range: 0.16 to 0.94.
Compliance counts are not retained for this entry. Check the original report.
Colour2 mg/l Pt/Co
Source parameter: Colour. Published mean: 2 mg/l Pt/Co.
Samples: 53. Range: <1.8 to 3.3.
Compliance counts are not retained for this entry. Check the original report.
Turbidity0.11 FTU
Source parameter: Turbidity. Published mean: 0.11 FTU.
Samples: 53. Range: <0.09 to 0.26.
Compliance counts are not retained for this entry. Check the original report.
Conductivity553 µS/cm
Source parameter: Conductivity. Published mean: 553 µS/cm.
Samples: 53. Range: 508 to 703.
Compliance counts are not retained for this entry. Check the original report.
Metals 8 parameters
Keep the units and sampling context when comparing results. Plumbing at an individual property can affect metal measurements.
Lead as Pb1.5 µg/l
Source parameter: Lead as Pb. Published mean: 1.5 µg/l.
Samples: 8. Range: <0.9 to 5.8.
Compliance counts are not retained for this entry. Check the original report.
Iron as Fe7 µg/l
Source parameter: Iron as Fe. Published mean: 7 µg/l.
Samples: 53. Range: <5 to 28.
Compliance counts are not retained for this entry. Check the original report.
Aluminium as Al8.4 µg/l
Source parameter: Aluminium as Al. Published mean: 8.4 µg/l.
Samples: 53. Range: <8.2 to 13.2.
Compliance counts are not retained for this entry. Check the original report.
Copper as Cu0.039 mg/l
Source parameter: Copper as Cu. Published mean: 0.039 mg/l.
Samples: 8. Range: <0.014 to 0.215.
Compliance counts are not retained for this entry. Check the original report.
Manganese as Mn0.5 µg/l
Source parameter: Manganese as Mn. Published mean: 0.5 µg/l.
Samples: 53. Range: <0.5 to 0.7.
Compliance counts are not retained for this entry. Check the original report.
Nickel as Ni1.3 µg/l
Source parameter: Nickel as Ni. Published mean: 1.3 µg/l.
Samples: 8. Range: <0.7 to 1.8.
Compliance counts are not retained for this entry. Check the original report.
Arsenic as As0.9 µg/l
Source parameter: Arsenic as As. Published mean: 0.9 µg/l.
Samples: 8. Range: <0.7 to 1.1.
Compliance counts are not retained for this entry. Check the original report.
Selenium as Se0.9 µg/l
Source parameter: Selenium as Se. Published mean: 0.9 µg/l.
Samples: 8. Range: 0.4 to 2.
Compliance counts are not retained for this entry. Check the original report.
Other monitored substances 4 parameters
The source names are retained so you can find the same entry in the original report. A less-than symbol means the reported number is not an exact concentration.
Nitrate as NO325 mg/l
Source parameter: Nitrate as NO3. Published mean: 25 mg/l.
Samples: 53. Range: 21 to 35.
Compliance counts are not retained for this entry. Check the original report.
Trihalomethanes19 µg/l
Source parameter: Trihalomethanes. Published mean: 19 µg/l.
Samples: 8. Range: 7 to 27.
Compliance counts are not retained for this entry. Check the original report.
Bromate1 µg/l
Source parameter: Bromate. Published mean: 1 µg/l.
Samples: 116. Range: <0.5 to 7.3.
Compliance counts are not retained for this entry. Check the original report.
Ammonium as NH40.08 mg/l
Source parameter: Ammonium as NH4. Published mean: 0.08 mg/l.
Samples: 53. Range: <0.03 to 0.15.
Compliance counts are not retained for this entry. Check the original report.
Unlisted parameters are not necessarily absent from the water. They may be unavailable in this extraction. The full supplier report remains the primary reference.
Source, dates and help
- Reporting period
- 2024
- Source retrieved
- 2026-02-27
- Last verified source check
- 2026-09-06
- Original source
- Thames Water report
Published area statistics are not a test at your home or a current incident report.
How we handle the data · Report a correction · Official supplier help and updates
Keep this report
Link to ABBEY WOODSaved areas stay on this device. This does not subscribe you to messages or emergency alerts.
Help us make this clearer
Optional, anonymous feedback. Please answer based on what the report explained.
What does this report describe?
Did this help answer your question?
We store daily answer counts, without names or visitor identifiers. Repeated answers can contribute; this is not a representative survey.