AYLESBURY NORTH: supplier water report
This is a report for the named source area. Check your postcode before assuming it describes the water serving your address.
A newer source document is awaiting validation. The figures below are from the approved reporting period shown. Official supplier information
Thames Water · Supply area: AYLESBURY NORTH
Published water hardness
289mg/l as CaCO₃
Hard
Hardness reporting period: 2024
4 samples · reported range 281–299 mg/l
This hardness can contribute to limescale in kettles and appliances. Use the units in your appliance manual and follow its care instructions. Hardness is not a health or safety score.
2.89 mmol/l
A conversion of the published hardness, not another test. Follow your appliance’s model-specific instructions.
Has the hardness changed?
History for this reported source area. Only comparable annual statistics appear in the chart; rolling summaries are kept separate. These are not daily tests at your address.
A comparable historical series is not available yet. We will add earlier reports when we can verify their periods and source areas.
Inside the supplier report
Period: 2024. Summary values do not establish that every sample complied. Read the supplier’s notes for investigations and actions.
Hardness and minerals 7 parameters
Useful for understanding mineral composition and appliance settings. Different minerals are separate measurements; hardness does not determine them all.
Hardness (Total) as CaCO3289 mg/l as CaCO₃
Source parameter: Hardness (Total) as CaCO3. Published mean: 289 mg/l as CaCO₃.
Samples: 4. Range: 281 to 299.
Compliance counts are not retained for this entry. Check the original report.
Fluoride as F0.12 mg/l
Source parameter: Fluoride as F. Published mean: 0.12 mg/l.
Samples: 8. Range: 0.11 to 0.15.
Compliance counts are not retained for this entry. Check the original report.
Magnesium2.6 mg/l
Source parameter: Magnesium. Published mean: 2.6 mg/l.
Samples: 4. Range: 2.5 to 2.7.
Compliance counts are not retained for this entry. Check the original report.
Alkalinity as CaCO3251 mg/l as CaCO₃
Source parameter: Alkalinity as CaCO3. Published mean: 251 mg/l as CaCO₃.
Samples: 4. Range: 241 to 256.
Compliance counts are not retained for this entry. Check the original report.
Sodium as Na13 mg/l
Source parameter: Sodium as Na. Published mean: 13 mg/l.
Samples: 8. Range: 13 to 14.
Compliance counts are not retained for this entry. Check the original report.
Chloride as Cl22 mg/l
Source parameter: Chloride as Cl. Published mean: 22 mg/l.
Samples: 8. Range: 20 to 23.
Compliance counts are not retained for this entry. Check the original report.
Sulphate as SO421 mg/l
Source parameter: Sulphate as SO4. Published mean: 21 mg/l.
Samples: 8. Range: 19 to 22.
Compliance counts are not retained for this entry. Check the original report.
Taste, appearance and treatment 5 parameters
These are published sample results. They cannot diagnose a change in taste, smell or appearance at your tap today.
pH (acidity / alkalinity)7.3 pH units
Source parameter: Hydrogen Ion. Published mean: 7.3 pH units.
Samples: 52. Range: 7.2 to 7.5.
Compliance counts are not retained for this entry. Check the original report.
Chlorine (Residual)0.52 mg/l
Source parameter: Chlorine (Residual). Published mean: 0.52 mg/l.
Samples: 157. Range: 0.11 to 0.74.
Compliance counts are not retained for this entry. Check the original report.
Colour<1.8 mg/l Pt/Co
Source parameter: Colour. Published mean: <1.8 mg/l Pt/Co.
The symbol is part of the source result; do not treat this as an exact concentration.
Samples: 52. Range: <1.8 to <1.8.
Compliance counts are not retained for this entry. Check the original report.
Turbidity0.09 FTU
Source parameter: Turbidity. Published mean: 0.09 FTU.
Samples: 52. Range: <0.09 to 0.19.
Compliance counts are not retained for this entry. Check the original report.
Conductivity544 µS/cm
Source parameter: Conductivity. Published mean: 544 µS/cm.
Samples: 52. Range: 525 to 570.
Compliance counts are not retained for this entry. Check the original report.
Metals 8 parameters
Keep the units and sampling context when comparing results. Plumbing at an individual property can affect metal measurements.
Lead as Pb<0.9 µg/l
Source parameter: Lead as Pb. Published mean: <0.9 µg/l.
The symbol is part of the source result; do not treat this as an exact concentration.
Samples: 8. Range: <0.9 to <0.9.
Compliance counts are not retained for this entry. Check the original report.
Iron as Fe5 µg/l
Source parameter: Iron as Fe. Published mean: 5 µg/l.
Samples: 52. Range: <5 to 6.
Compliance counts are not retained for this entry. Check the original report.
Aluminium as Al8.4 µg/l
Source parameter: Aluminium as Al. Published mean: 8.4 µg/l.
Samples: 52. Range: <8.2 to 12.6.
Compliance counts are not retained for this entry. Check the original report.
Copper as Cu0.031 mg/l
Source parameter: Copper as Cu. Published mean: 0.031 mg/l.
Samples: 8. Range: <0.014 to 0.069.
Compliance counts are not retained for this entry. Check the original report.
Manganese as Mn0.5 µg/l
Source parameter: Manganese as Mn. Published mean: 0.5 µg/l.
Samples: 52. Range: <0.5 to 0.9.
Compliance counts are not retained for this entry. Check the original report.
Nickel as Ni0.8 µg/l
Source parameter: Nickel as Ni. Published mean: 0.8 µg/l.
Samples: 8. Range: <0.7 to 1.1.
Compliance counts are not retained for this entry. Check the original report.
Arsenic as As<0.7 µg/l
Source parameter: Arsenic as As. Published mean: <0.7 µg/l.
The symbol is part of the source result; do not treat this as an exact concentration.
Samples: 8. Range: <0.7 to <0.7.
Compliance counts are not retained for this entry. Check the original report.
Selenium as Se0.6 µg/l
Source parameter: Selenium as Se. Published mean: 0.6 µg/l.
Samples: 8. Range: 0.4 to 0.8.
Compliance counts are not retained for this entry. Check the original report.
Other monitored substances 4 parameters
The source names are retained so you can find the same entry in the original report. A less-than symbol means the reported number is not an exact concentration.
Nitrate as NO325 mg/l
Source parameter: Nitrate as NO3. Published mean: 25 mg/l.
Samples: 8. Range: 24 to 27.
Compliance counts are not retained for this entry. Check the original report.
Trihalomethanes11 µg/l
Source parameter: Trihalomethanes. Published mean: 11 µg/l.
Samples: 8. Range: 9 to 15.
Compliance counts are not retained for this entry. Check the original report.
Bromate<0.5 µg/l
Source parameter: Bromate. Published mean: <0.5 µg/l.
The symbol is part of the source result; do not treat this as an exact concentration.
Samples: 32. Range: <0.5 to <0.5.
Compliance counts are not retained for this entry. Check the original report.
Ammonium as NH4<0.03 mg/l
Source parameter: Ammonium as NH4. Published mean: <0.03 mg/l.
The symbol is part of the source result; do not treat this as an exact concentration.
Samples: 8. Range: <0.03 to <0.03.
Compliance counts are not retained for this entry. Check the original report.
Unlisted parameters are not necessarily absent from the water. They may be unavailable in this extraction. The full supplier report remains the primary reference.
Source, dates and help
- Reporting period
- 2024
- Source retrieved
- 2026-02-27
- Last verified source check
- 2026-09-06
- Original source
- Thames Water report
Published area statistics are not a test at your home or a current incident report.
How we handle the data · Report a correction · Official supplier help and updates
Keep this report
Link to AYLESBURY NORTHSaved areas stay on this device. This does not subscribe you to messages or emergency alerts.
Help us make this clearer
Optional, anonymous feedback. Please answer based on what the report explained.
What does this report describe?
Did this help answer your question?
We store daily answer counts, without names or visitor identifiers. Repeated answers can contribute; this is not a representative survey.